In brief: At Dazzle Dental Clinic, composite (resin) veneers start from ₹10,000 per tooth and porcelain veneers from ₹12,000 per tooth. The total depends on the material, how many teeth are treated, how much colour or shape change is needed and whether whitening or gum work comes first. Your exact quote follows the consultation and digital scan.
Veneer Prices at Dazzle (2026)
These are the starting prices on our fees page. They are "from" figures: the price for your teeth is set once we have examined them and planned the result.
- Composite laminates / resin veneers / bonding: from ₹10,000 per tooth
- Porcelain veneers / laminates: from ₹12,000 per tooth (Ivoclar e.max CAD ₹15,000; layered e.max ₹25,000)
- Smile analysis and treatment planning: from ₹5,000
- 3D smile simulation: ₹15,000
- Office whitening: ₹15,000 (Opalescence or Pola Office) or ₹25,000 (Zoom), cleaning extra
- Cosmetic gum surgery: from ₹25,000; crown lengthening: from ₹7,000
- Consultation: ₹1,000
Online, veneer prices in India appear to range wildly. Most of that spread comes from quotes that cover different materials, different laboratories and different amounts of planning, so two "per tooth" prices are rarely describing the same treatment.
What Drives the Cost of Veneers
The material
Composite veneers are built directly on the tooth in resin and shaped chairside, usually in one appointment, with no laboratory fee. Porcelain veneers are made in a dental laboratory, which adds fabrication cost but gives better stain resistance and longer service.
Within porcelain there are options. E.max (lithium disilicate) is the usual choice for front teeth because it combines strength and translucency, and it can be pressed or milled. Hand-layered feldspathic porcelain allows the finest characterisation but is more fragile and takes more ceramist time. Zirconia is stronger but less translucent, so it is kept for specific situations such as heavily discoloured teeth.
The number of teeth
Veneers are priced per tooth. Most smile cases treat the 6 to 10 upper front teeth that show when you smile, so the number of teeth in your smile line largely sets the total. Planning and mock-up costs are shared across more teeth in larger cases.
The complexity of the case
Deep staining (for example tetracycline discolouration), large changes in shape or length, and bite problems all need more planning and more elaborate laboratory work. Minor shape refinement on well-aligned teeth with good natural colour sits at the lower end.
Planning and preview
A well-planned case starts with photographs, a TRIOS 5 intraoral scan and a digital smile design, followed by a mock-up so you see the proposed shape before any tooth is prepared. Skipping this step lowers the quote but makes the result less predictable.
Where the veneers are made
Our porcelain work is designed and milled in our in-house digital lab, Dream Dental Studio, using Amann Girrbach Ceramill milling. Shade and shape can be adjusted without sending work to an outside laboratory and waiting for it to come back.
What a Per-Tooth Quote May Not Include
A "per tooth" figure is only part of the plan. Before comparing quotes, check whether these are included or billed separately:
- Consultation, smile analysis, digital smile design and mock-up
- Whitening of the teeth that will not be veneered, done first so the veneer shade can match
- Gum contouring or crown lengthening where the gum line is uneven
- Orthodontic alignment where crowded or spaced teeth would otherwise need heavy preparation
- A nightguard if you grind your teeth, which protects porcelain and composite alike
We give you an itemised plan listing each of these before treatment starts.
What Very Low Veneer Prices Usually Mean
Very cheap veneers usually rely on unbranded composite, generic ceramic with no custom shade work, or an outsourced laboratory with little quality control. The result often looks flat or too opaque up close.
Because veneers are a cosmetic treatment, the appearance is what you are paying for. Correcting a badly matched or badly contoured porcelain veneer means removing it and making a new one, so a low first price can become the more expensive route.
Composite or Porcelain: Cost Over Time
Composite costs less at the start and needs little or no removal of enamel, which suits younger patients and anyone who wants a reversible first step. It stains and chips more easily, so expect periodic polishing, repair and eventual replacement.
Porcelain costs more at the start, usually needs a thin layer of enamel removed and is a long-term commitment. It keeps its colour and surface far better, so over many years the cost gap narrows. Our composite vs porcelain veneers guide compares the two in detail.
Veneers as Part of a Smile Makeover
When veneers are combined with whitening, laser gum contouring or bonding, the plan becomes a smile makeover and is priced as one programme. Our smile makeover cost guide lists those package ranges, and the veneers and cosmetic dentistry page explains the treatment itself.
Veneers for International Patients
Patients come to us from all over the world, including the US, UK, Australia, New Zealand, the GCC countries and South Africa; our international patients page covers travel and planning. Porcelain veneers usually need two visits: one for planning, preparation and provisional veneers, and a second for final bonding about 5 to 7 days later. Composite veneers can often be completed in a single extended appointment.
You can start with a video consultation and send photographs so we can suggest a likely plan before you travel. Our clinics are about 20 minutes from the airport.
Want a firm figure for your own teeth? Book a Consult at our Bandra West or Kemps Corner clinic.



